Vol. 16, No. 4, pp. 328-336 (2020)
EXPERIMENTAL INVESTIGATION ON TEMPERATURE EVOLUTION OF
STEEL BEAMS IN NATURAL FIRES
Er-Feng Du 1, Gan-Ping Shu 1, *, Yi-Qun Tang 1, Ying Qin 1, Xiao Lyu 2 and Zhong Zhou 1
1 Key Laboratory of Concrete and Prestressed Concrete Structures of Ministry of Education, School of Civil Engineering, Southeast University, Nanjing, China
2 School of Civil Engineering, Shandong Jianzhu University, Ji’nan, China
* (Corresponding author: E-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.)
Received: 3 June 2020; Revised: 5 September 2020; Accepted: 6 September 2020
DOI:10.18057/IJASC.2020.16.4.5
 View Article |
Export Citation: Plain Text | RIS | Endnote |
ABSTRACT
This paper presents an experimental project of a 3D steel portal frame subjected to a natural fire to investigate the evolution of temperatures of the hot gas layer and the steel beams. Temperature evolution of the steel beams during the test was recorded and compared with those calculated by current design codes, i.e. Eurocode EN 1993-1-2 and Chinese Code CECS200. The experimental results revealed that the temperature of the hot gas gradually decreased with the distance from the fire source, and the temperature variations in the steel beams had obvious hysteresis compared to those of the hot gas. The results calculated according to the equations specified by EN 1993-1-2 and CECS200 were very similar. However, there were noticeable differences between the calculated data and the experimental results after the temperature of the steel beam was higher than 600oC. The calculation for the temperature of steel beams in the hot gas layer does not need additional consideration of the thermal radiation from the flame. Based on the experimental results, this paper improves the equations specified in EN 1993-1-2, using correction coefficients of convection and radiation. It is found that the modified method obtains calculation results in satisfactory agreement with the experimental results, thereby providing a reference for predicting the temperature of steel beams in natural fires.
KEYWORDS
Experimental study, Steel beam, Hot gas, Temperature, Natural fire
REFERENCES
[1] Luo B., Sun Y., Guo Z.X. and Pan H.T., “Multiple random error effect analysis of cable length and tension of cable strut tensile structure”, Advances in Structural Engineering, 19(8), 1289-1301, 2016.
[2] Tong G.S., Pi Y.L. and Gao W., “In-plane nonlinear analysis and buckling of shear-deformable circular arches”, Advanced Steel Construction, 16(1), 55-64, 2020.
[3] Xue S.D., Lu J., Li X.Y. and Liu R.J., “Improved force iteration method based on rational shape design solving self-stress modes of cable-truss tensile structure”, Advanced Steel Construction, 16(2), 170-180, 2020.
[4] Yan X.Y., Hu H., Chen Z.H. and Yang Y., “An improved mathematical calculation method for beam string structure based on static equilibrium principle”, International Journal of Steel Structures, 20(4), 1241-1255, 2020.
[5] Lu L.M., Yuan G.L., Huang Z.H., Shu Q.J. and Li Q., “Performance-based analysis of large steel truss roof structure in fire”, Fire Safety Journal, 93, 21-38, 2017.
[6] Du Y., Liew J.Y.R., Zhang H. and Li G.Q., “Pre-tensioned steel cables exposed to localised fires”, Advanced Steel Construction, 14(2), 206-226, 2018.
[7] Woźniczka P., “Fire resistance assessment of the long-span steel truss girder”, Archives of Civil Engineering, LXVI(2), 63-75, 2020.
[8] Liu H.B., Zhang Y.J., Wan L. and Chen Z.H., “Mechanical performance of welded hollow spherical joints at elevated temperatures”, Advanced Steel Construction, 16(1), 1-12, 2020.
[9] Jiang S.C., Zhu S.J., Guo X.N. and Li Z.Y., “Full-scale fire tests on steel roof truss structures”, Journal of Constructional Steel Research, 169, 1-13, 2020.
[10] Pyl L., Schueremans L., Dierckx W., and Georgieva I., “Fire safety analysis of a 3D frame structure based on a full-scale fire test”, Thin-Walled Structures, 6, 204-212, 2012.
[11] Johnston R.P.D., Lim J.B.P., Lau H.H., Xu Y.X., Sonebi M., Armstrong C.G. and Mei C.C., “Finite-element investigation of cold-formed steel portal frames in fire”, Structures and Buildings, 169(SB1), 3-9, 2015.
[12] Lou G.B., Wang C.H., Jiang J., Jiang Y.Q., Wang L.W. and Li G.Q., “Experimental and numerical study on thermal-structural behavior of steel portal frames in real fires”, Fire Safety Journal, 98, 48-62, 2018.
[13] Lou G.B., Wang C.H., Jiang J., Jiang Y.Q., Wang L.W. and Li G.Q., “Fire tests on full-scale steel portal frames against progressive collapse”, Journal of Constructional Steel Research, 145, 137-152, 2018.
[14] Roy K., Lim J.B.P., Lau H.H., Yong P.M., Clifton G.C., Johnston R.P.D., Wrzesien A. and Mei C.C., “Collapse behaviour of a fire engineering designed single-storey cold-formed steel building in severe fires”, Thin-Walled Structures, 142, 340-357, 2019.
[15] Milke J.A., “Performance-based analysis methods to determine the fire resistance of structural members”, Proceedings of the 2001 Structures Congress and Exposition, Washington, D.C., United States , 1-11, 2001.
[16] Shi Y.J., Bai Y. and Wang Y.Q., “Study on performance-based fire-resisting design and key technologies for large spatial steel structures”, Engineering Mechanics, 23(Sup. II), 85-92, 2006.
[17] CECS200, Technical code for fire safety of steel structures in buildings, China Association for Engineering Construction Standardization, Beijing, China, 2006.
[18] EN1991-1-2, Eurocode1: Actions on structure. Part 1-2: General actions-Actions on structures exposed to fire, European Committee for Standardization, Brussels, Belgium, 2002.
[19] EN1993-1-2, Eurocode 3: Design of steel structures. Part 1-2: General rules-Structural fire design, European Committee for Standardization, Brussels, Belgium, 2005.
[20] Latham D.J., Kirby B.R. and Thomson G., “The temperatures attained by unprotected steelwork in experimental natural fires”, Fire Safety Journal, 12, 139-152, 1987.
[21] Wong M.B., Ghojel J.I. and Grozier D.A., “Temperature-time analysis for steel structures under fire conditions”, Structural Engineering and Mechanics, 6(3), 275-289, 1998.
[22] Ghojel J.I., “A new approach to modelling heat transfer in compartment fires”, Fire Safety Journal, 31, 227-237, 1998.
[23] Wald F., Chladná M., Moore D., Santiago A. and Lennon T., “Temperature distribution in a full-scale steel framed building subject to a natural fire”, Steel and Composite Structure, 6 (2), 159-182, 2006.
[24] Wald F., Chlouba J., Uhlír A., Kallerová P. and Štujberová M., “Temperatures during fire tests on structure and its prediction according to Eurocodes”, Fire Safety Journal, 44, 135-146, 2009.
[25] Du Y. and Li G.Q., “Fire radiation effect on steel member at elevated temperature in large space fire”, Fire Safety Science, 15(4), 189-199, 2006.
[26] Huang J.Q., Li G.Q., Du Y., Bao P.Q. and Liu K., “Influence of flame radiation on temperature rising of steel members in large space fire”, Journal of Natural Disasters, 17(5), 87-94, 2008.
[27] Zhang C., Li G.Q. and Wang R.L., “Using adiabatic surface temperature for thermal calculation of steel members exposed to localized fires”, International Journal of Steel Structures, 13(3), 547-556, 2013.
[28] Zhang G.W., Zhu G.Q. and Huang L.L., “Temperature development in steel members exposed to localized fire in large enclosure”, Safety Science, 62(3), 319-325, 2014.
[29] McGrattan K., Hostikka S., Floyd J., McDermott R. and Vanella M., Fire Dynamics Simulator User’s Guide (Version 6), National Institute of Standards and Technology (NIST), Maryland, 2015.